Lippert Components OneControl HVAC Control 2.0, Руководство по установке OEM

Страница: 9 / 14

Rev: 11.09.20
Page 9
CCD-0001450
Fig. 12
Adjusting HVAC Control
1.
In the touch panel home screen, select the HVAC icon to open the app (Fig. 12A).
2.
In the HVAC menu screen, select the Climate Zone you wish to adjust (Fig. 13).
3.
There are two boxes on the left hand side of the screen (Fig. 14). The top box controls the heating/
cooling mode. The bottom box controls the fan.
A
A.
Press the top box to choose the HVAC mode. A large box will populate with all available options
for that climate zone. Choose from the following:
I. Heat/Cool – In this mode choose a high and low set point and the HVAC system will operate
to keep the temperature between those 2 set points.
II. Heat – In this mode choose your desired set point and the furnace or heat pump will
operate to keep the temperature at that set point. If equipped with a heat pump, you will be
prompted to choose a heat source. The options are gas or heat pump.
III. Cool – In this mode choose the desired set point and the A/C will operate to keep the
temperature at that set point.
IV. Off – This setting turns the HVAC system off completely.
B.
Once the desired mode is selected, press the "Close" button (Fig. 14A).
Fig. 13 Fig. 14
A