11
574-537-8900
Rev: 10.23.19
JT’s Strong Arm
™
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0001455
Operation
1.
Level your trailer side-to-side.
2.
Lower the front of the trailer 3/4” lower than the rear.
3.
Lower and set rear jacks evenly.
4.
Tighten the T-Bolts on the two rear Strong Arm
Jack Stabilizers.
5.
Raise the front of the trailer to make it level front-
to-back.
6.
Tighten T-Bolts on the four front Strong Arm
Jack Stabilizers.
7.
Briefly press the electric jack switch so the jacks
slightly lift the front of the trailer. This eliminates the
play (movement) at the bolts and bolt holes between the
stabilizers and the trailer.
Maintenance
Periodically wash the strong arms with water to remove
any salt or debris. Then wipe dry with a clean, dry cloth.
Notes
