3
574-537-8900
Rev: 11.18.19
Innolight Sliding
Electric Step
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0002550
Parts List
• Tool to install threaded
inserts
• Cordless or electric drill or
screw gun
• Appropriate drive bits
• 5 mm (
7/32
”) drill bit
• 6.5 mm (
1/4
”) drill bit
NOTE:
Part numbers are shown for identification purposes
only. Not all parts are available for individual sale. All parts
with a link to the Lippert Store can be purchased
Letter
PN
Description
Qty
A
033-08100 = UNI 5732 Round head
square neck bolt
4
B
856-205-D-ZF00
Front bracket
2
C
120-63250 = DIN 7504 Hex head
self-drilling screw
4
D
037-0080 = UNI 6593 Flat washer, large
series
4
E
007-00080 =UNI 7474 Torque type hex
lock nuts
4
F
856-129-0
Threaded insert
2
G
015-08020 = DIN 6921 Hex head flange
screws
2
H
---
Pre-assembled
aluminum chan-
nel
1
A
B
C
D
E
F
G
H
Resources Required
Installation
Installation of the sliding electric single step can be difficult
and installers should not exceed their capabilities. Do not
lift the unit by the axles. The axles were not designed as a
viable lift point.
INCORRECT RAISING OR LOWERING OF THE UNIT
COULD RESULT IN DEATH, SERIOUS INJURY AND/
OR DAMAGE TO THE UNIT.
