Lippert Components 805592 Скачать руководство пользователя страница 2

2

lci1.com      

 

574-537-8900    

 

Rev: 06.08.20

Hotspot

 OEM Prepped  

Installation and Owner’s Manual 

(For Aftermarket Applications)

CCD-0002226

Introduction

Hotspot

 was designed and engineered for the mobile 

lifestyle. The weatherproof, external cellular antenna 

array increases your signal range far beyond a simple 

“off-the-shelf” mobile hotspot. Hotspot utilizes Direct Link 

Technology specifically designed to go wherever you 

go. Direct Link Technology provides the fastest 4G LTE 

connectivity available, up to 150Mbps, so you’re connected 

wherever the road may take you.
Hotspot

 can be used as a portable device but should be 

fastened in the trailer to a mounting surface initially.
Hotspot

 is compatible with AT&T

®

 cellular service using 

LTE bands 2,4 & 12. In order to activate your Hotspot

the owner will need to purchase their own LCI data 

package and activate a LCI user account. 
Additional information about this product can be 

obtained fro

lci1.com/support

 or by using the myLCI 

app. Replacement components can be ordered from           

https://store.lci1.com/

 or by using the myLCI app.

The myLCI app is available for free on iTunes

®

 for iPhone

®

 

and iPad

®

 and also on Google Play

 for Android

 users. 

iTunes

®

, iPhone

®

 and iPad

®

 are registered trademarks  

of Apple Inc. Google Play

 and Android

 are trademarks  

of Google Inc.

Safety Information

Read and understand all instructions before installing  

or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables 

can change the circumstances of the instructions, i.e.,  

the degree of difficulty, operation and ability of the  

individual performing the instructions. This manual cannot 

begin to plot out instructions for every possibility, but  

provides the general instructions, as necessary, for  

effectively interfacing with the device, product or system. 

Failure to correctly follow the provided instructions may 

result in death, serious personal injury, severe product  

and/or property damage, including voiding of the LCI  

limited warranty.

FAILURE TO FOLLOW THE INSTRUCTIONS 

PROVIDED IN THIS MANUAL MAY RESULT IN DEATH, 

SERIOUS INJURY, UNIT DAMAGE OR VOIDING OF 

THE COMPONENT WARRANTY.

THE “WARNING” SYMBOL ABOVE IS A SIGN THAT 

A SAFETY RISK IS INVOLVED AND MAY CAUSE 

DEATH, SERIOUS PERSONAL INJURY AND/OR 

SEVERE PRODUCT OR PROPERTY DAMAGE IF 

NOT SAFELY ADHERED TO AND WITHIN THE 

PARAMETERS SET FORTH IN THIS MANUAL. 

THE “CAUTION” SYMBOL ABOVE IS A SIGN THAT 

A SAFETY RISK IS INVOLVED AND MAY CAUSE 

PERSONAL INJURY AND/OR PRODUCT OR PROPERTY 

DAMAGE IF NOT SAFELY ADHERED TO AND WITHIN 

THE PARAMETERS SET FORTH IN THIS MANUAL

ALWAYS WEAR EYE PROTECTION WHEN 

PERFORMING SERVICE OR MAINTENANCE TO THE 

UNIT. OTHER SAFETY EQUIPMENT TO CONSIDER 

WOULD BE HEARING PROTECTION, GLOVES AND 

POSSIBLY A FULL FACE SHIELD, DEPENDING ON 

THE NATURE OF THE SERVICE.

Содержание 805592













Отзывы: