Lipco UFD 100, Перевод оригинальной инструкции, Страница: 9 / 24

Original instructions Reversing Harrow UFD 100/110/120/140
9 - 24 100102-02-EN BA UFD 100_110_120_140 / 09.08.2019
6. Accident prevention
Most accidents that occur during work, maintenance or transport of a
machine are due to non-observance of the most elementary rules of
accident prevention.
It is, therefore, necessary that all licensed users (relatives,
employees, colleagues) read and observe the rules given below and
written on the adhesive labels of the machine itself:
•
Turn off the universal joint shaft and the engine of the tractor
before carrying out any adjustments, maintenance or cleaning!
•
In order to achieve the highest possible performance of the
LIPCO Reversing Harrow , it must always be in perfect condition.
Maintenance or repairs must be carried out by trained persons
only. Spare parts must at least comply with the technical
requirements specified by the manufacturer! This is only
guaranteed for
LIPCO original spare parts!
•
Before each use, the suspension bolts of the three-point
suspension, the nuts and the screws, especially those of the
cutting blades, must be checked to ensure they are firmly
tightened!
•
Before starting up, please make sure that no people or animals
are in the vicinity!
•
Take special caution when working alongside roads or pathways!
•
Do not leave the machine running without supervision!
•
Before commencing maintenance and repair work, switch off the
engine and pull the key!
•
Do not wear wide or loose clothes (e.g. scarves)!