Lipco UFD 100, Перевод оригинальной инструкции, Страница: 19 / 24

Original instructions Reversing Harrow UFD 100/110/120/140
19 - 24 100102-02-EN BA UFD 100_110_120_140 / 09.08.2019
•
Check the gear oil level in the angular gear via the
corresponding plug. The angular gear should be filled with gear
oil to the lower edge of the filler neck.
•
1 st oil change after 30-50 operating hours.
•
Further oil changes every 200 operating hours or once a year.
Use gear oil SAE 90! (Fig. 10)
•
Check whether the cutting blades are tightened, and retighten
the screws, if necessary. Replace damaged screws immediately!
(See chapter "12. Replacement of the cutting blades").
•
Check the grease level in the chain case! (Approx. 4-5 cm). Use
liquid gear grease in the chain case! (Fig. 11)
Use sodium-bicarbonate-based liquid gear grease (type GP 00).
•
To enable the machine to
be safely put down, it
should be supported on
solid horizontal ground by
means of the height-
adjustable base.
(Fig. 13)
•
Secure the supporting base in the uppermost position during soil
cultivation.
Fig. 9
Lubricating
nipplel
Fig. 10 Fig. 11
Filler neck Plug
Fig. 13 Supporting
base