Operating Manual
Cross-flow fan unit type GSG-NV1 / 2
9 - 64
010980-26-E BA GSG-NV1_2 / 23.03.2012
5. Accident prevention
Most accidents that occur during use, maintenance or transport
are caused by failure to comply with the simplest basic rules.
Therefore it is important that all persons involved with use of the
machine are aware of and comply with the following rules:
In order to achieve maximum performance from the
LIPCO
GSG-NV
it must be in proper working order. Maintenance and
repair may be performed only by trained personnel. Replace-
ment parts must fulfill the minimum technical specifications re-
quired by the manufacturer! This is ensured only by the use of
LIPCO original replacement parts
!
Before each use, check the trailer hitch bolts on the three-point
mount and all nuts and bolts!
Exercise special caution when using roads or paths, e.g. for turn-
ing the entire tunnel spray unit.
Always shut off the motor and remove the ignition key when per-
forming maintenance or repairs!
During work and transport on roads do not transport objects or
persons on the machine!
Operate machine only with drive unit fully protected, i.e. univer-
sal joint shaft completely covered and additional protection on
tractor and GSG
.
Make sure that the universal joint shaft connec-
tions lock securely into place!
The machine should be on a level surface or a stable support
during all work on the machine!
When working on the machine in raised position, always secure
by mechanical means using suitable supports!