Operating Manual
Cross-flow fan unit type GSG-NV1 / 2
51 - 64
010980-26-E BA GSG-NV1_2 / 23.03.2012
Before opening or releasing pressurized parts (valves, hoses,
etc.), they must be de-pressurized.
Caution:
Nozzles and other small parts that come into contact with the
spray liquid should never be blown out with the mouth.
After working on pressurized parts, always check the seals in the
pressure circuit before operating the system with plant protection
agents.
Clean all filters.
Recycling injector:
After repairs or cleaning, make
sure that the injector is re-
assembled correctly.
(Fig. 40)
Pay attention to the diameter
“d”, since there are different
versions
– see also the re-
placement parts list.
Fig. 40
Grease bearings of all fans
every 8 hours. Access to the
greasing nipple is from outside
the fan unit wall.
One nipple per bearing, overall
number of nipples depends on
fan unit wall height.
Fig. 40a