Lipco GSG-NV Series, Руководство по эксплуатации, Страница: 20 / 64

Operating Manual Cross-flow fan unit type GSG-NV1 / 2
20 - 64 010980-26-E BA GSG-NV1_2 / 23.03.2012
11. Preparation
In order to ensure safety and efficiency when operating the
LIPCO
GSG-NV the following tasks must be performed prior to starting
work:

Always replace or install any damaged or missing components
before operating the machine!

Check to make sure that all bolts are tightened.

Check the hydraulic lines for damage and replace, if necessary,
according to the regulations of the trade association.

Before each use, make sure that all safety devices on the tractor,
LIPCO GSG-NV and the universal joint shaft are installed and
functioning.
12. Attachment to the towing vehicle

Before operation, check the machine and the towing vehicle to
ensure that they are safe for traffic and safe for operation!

No one may enter the area between the towing vehicle and the
LIPCO GSG-NV unless the vehicle is secured against rolling by
means of the parking brake and / or wheel chocks!

Do not enter the turning and swiveling area of the machine!

When the machine is in transport position, always make sure
that the tractor’s lower links are sufficiently blocked from the side
in order to prevent the machine from swinging out to the side!

The lower links must be secured so that they do not impact the
tractor tires.