User Manual
Models:
S-5WCLBLUE
S5WCLPINK
and
S5WCLGREEN
INTRODUCTION:
Safety Precautions:
Please keep this instruction manual in a safe place for
future reference.
It is not necessary to insert any batteries in LINSAY
Smart Watch as it has a
“
Lithium Rechargeable
Battery
”
sealed inside.
After long periods of storage without being used,
LINSAY Smart Watch should be charged before it is
used.
Do not try to alter, disassemble or repair LINSAY
Smart Watch yourself. In case of problem please refer
only to a assigned LINSAY technician.
Keep in mind:
Turn the Smart Watch ON
and OFF:
There is an ON/OFF switch at the right side of the
Smart Watch. The LINSAY Smart Watch is shipped
from the factory with the switch on OFF position.
Before the LINSAY Smart Watch can be used or the
lithium battery in charging mode, the switch must be
turned to the ON position.
Keep in mind: Prevention and warning:
Medical issues for pre-existing conditions persons.
Please stop to use the LINSAY kids watch if your child
start to have altered vision, convulsions, dizziness,
disorientation. etc. We recommend 15 minutes of
relax between an hour of play.
As any device the use must to be moderate and
between rests breaks. Parent
’
s supervision is
recommended.
PRODUCT USER INTERFACE:
①
ON/OFF SWITCH:
Switch the button to turn the
LINSAY Smart Watch ON or OFF.
②
CAMERA/SHUTTER BUTTON
: Press to take a
photo or record a video.
③
HOME BUTTON:
Press and hold for 3 seconds to
turn LINSAY Smart Watch LCD ON or OFF,
Press to switch between Main Menu and Sub
Menu.
④
Micro SD Memory CARD SLOT:
Insert Micro SD
Memory Card (not included) to increase memory
capacity of the camera and store more photos
and videos.
⑤
USB
PORT:
Use to connect the LINSAY
Smart Watch to a computer, to recharge
the
battery,
or
upload
your
photos/videos to your computer.
⑥
1.5
’
Colorful Touch Screen:
Press, Slide
Left/Right/Up/Down
to
use
the
capacitive touch screen operation to
access activities.
⑦
Turn-able CMOS Sensor:
0.3 Mega Pixels
Resolution.
⑧
Built-in Microphone:
to pick up ambient sounds
while recording.
You are getting:
1 LINSAY Smart Watch With Silicone Wristband
1 USB cable
1 Instruction Manual
BEFORE USING LINSAY SMART WATCH:
Rechargeable Battery:
Before using the LINSAY
Smart Watch, please charge the battery by connecting
to a computer with the included USB cable (an icon
“
Charging
”
shows in the display). Insure the ON/OFF
switch is turned to the ON position
. To access the
ON/OFF switch, use your nails or a sharp object. It is
recommended that the battery be initially charged for
approximately
3 hours
.
Keep in mind:
The full charge of battery will take 3 hours.
If to charge the LINSAY smart watch take more than 3
hours, please use an USB power source different.
Keep in mind:
When the battery is being charged an icon
“
Charging
”
shows in the display. When the battery is fully
charged the
“
Charging
”
icon stops
“
charging
”
and shows
a fully charged icon.
Keep in mind:
When you will go to Charge the battery
should only be done under adult supervision.
Battery Status:
A battery icon in the display indicates if
the battery is running low.
How I can preserver the Battery Life?
To avoid
wasting battery energy the LINSAY Smart Watch has a
physical ON/OFF switch located at the right side of the
watch and the watch will automatically turn OFF after
certain seconds/minutes without using it. To turn it ON
again, simply press the HOME button.
AUTOMATIC SCREEN OFF
If you want extend the battery life, please go to
settings /advanced and set the time for automatic
screen off.
Reference of Battery time
This can vary by use: Low >2 weeks, Normal> 2-
3 days, and High > 1 day.
Keep in mind: The provided information about the
battery is based in the case of screen off and when is not
in use.
Keep in mind: it is not necessary to move the ON/OFF
switch to OFF in daily use.
We recommend to switch the ON/OFF switch to OFF,
only when the watch isn
’
t in use for an extended period
of time. Switch it to ON position before charging the
battery.
Keep in mind: The LINSAY Smart Watch is physically
turned OFF at his origin; user needs to turn the LINSAY
Smart Watch ON in order to start using the LINSAY
Smart Watch.
Keep in mind: Regularly charge the battery of LINSAY
Kids smart watch to keep it in good performance. Please
make a full charge at least every 6 months.
BATTERY Information
Im
portant information about BATTERY
The misuse of batteries can cause fire, bursting or
chemical burns. Please to prevent take precautions to
don't make short circuit, or disassemble or expose to
fire, or crush, or dropping. Please always keep the
battery out of the reach of children.
Micro SD Memory Card Installation:
- Insure the LINSAY Smart Watch is turned OFF.
- Open the rubber cover in the left side of the LINSAY
Smart Watch to access the Micro SD Memory Card
slot.
- Insert a Micro SD Memory Card and close the rubber
cover when it is done.
·
Removing Micro SD Card: Push and release, the card
is springily ejected.
Note
:
Pictures displayed on the screen are from either
the internal memory or external (Micro SD Memory
Card) memory depending on which item you have
selected previously in the SETTINGS
MEMORY
function.
Keep in mind:
The LINSAY Smart Watch supports Micro
SD Memory Card up to the capacity of 32GB.
How Can I connect it to the computer?
- The Micro USB connector with a rubber cover is
located on the left side of the LINSAY Smart Watch.
- Lift the rubber cover and insert the smaller end of the
included USB cable into the Micro-USB connector of the
LINSAY Smart Watch and insert the larger end into an
USB socket of a computer
Keep in mind:
Whenever
the LINSAY Smart Watch
is
connected to a computer the following occurs:
1. An icon
“
Charging
”
shows in the display.
2
. The battery is charged while the connection is
maintained.
3
. The "PHOTO" and "VIDEO" folders are uploaded
to the computer.
To view the photos or videos locate the folders on your
computer and open the
selected
folder.
If you wish you
may save any or all of the photos or videos to a location
of
your choice on your computer
.
TO START USING LINSAY SMART WATCH:
Switch the ON/ OFF switch located in the right side of
the LINSAY Smart Watch to ON position. Press the
HOME button or Shutter Button to wake the LINSAY
Smart Watch up. Press and Hold 3 second Home button
to wake up the LINSAY Smart Watch from standby.
Note: On daily use is not necessary to move the switch
ON/OFF switch to off.
When the clock is displayed on screen, press the HOME
button to go to the Main menu. Press the Shutter
button to take photos and videos.
NOTE: Once Time and Date are set, if the LINSAY Smart
Watch is switched OFF then user has to set Time and
Date again. User doesn
’
t need to switch OFF the LINSAY
Smart Watch to turn it OFF, the LINSAY Smart Watch is
in
“
Sleep
”
mode automatically when it is not in use(see
AUTOMATIC SCREEN OFF in this manual). To prevent
inadvertently switching OFF, The ON/OFF switch is
designed the way that it is not easily accessible. To
access the ON/OFF switch, use your nails or a sharp
object.
All that you can do with your WATCH:
Clock Display
Press the Home button and the clock will be displayed.
Click on the center of the screen to switch the clock
draw between analog and digital.
Swipe from left to right on the screen to see more clock
draw.
Press the home button to see the home menu and you
can select activities.
Press the shutter button to see and enter camera mode
.
Main MENU
To go Main Menu please press the HOME button. The
various functions of the LINSAY Smart Watch are
accessible on the 1.5
’
Colorful Touch Screen. There
functions are many, you have 12 different each with
different icon. There are sub-menus in each function.
1. Camera
7. Stopwatch
2. Video
8. Alarm
3. Voice Recorder
9. Playback
4. Talking hippo
10. Menu Layout
5. Timer
11. Games
6. Time Master
12. Settings
·
Touch an icon if you want to enter to an activity.
·
You can swipe from left or from right to scroll through
of main menu .
If you want you can change the menu layout from small
to big icons, just you need to go Settings/Menu Layout
and change it.
FUNCTIONS
:
1. The Camera
The camera can be moved 90 degrees Up and Downs.
Move the camera with your fingers Up and Down to
take SELFIE photos and videos.
Press the SHUTTER button to enter CAMERA mode.
You can also switch to VIDEO mode here.
·
When press the SHUTTER button or shutter icon
on the screen you can take a photo.
·
Swipe the screen
(from down to up) to invert the focus.
·
When you tap the MODE icon
on
the screen you can see the preview photo
with an effect, if you press the left or right
arrow icons or swipe the screen you can
go to different photo effects.
·
You can touch the MAGIC icon
on the screen and
you will see the preview photo with effect, also if you
press the left or right arrow icons or swipe the screen
you can go through different photo effects.
·
when you touch the icon PLAYBACK
on the
screen you can see the taken photos.
If you press the SHUTTER button or also touch the
screen you can exit of playback mode and return to
CAMERA mode.
2. Recording Video
Touch the Icon Camera
on the screen to go
CAMERA mode.
·
To Start to RECORD please press the SHUTTER key and
them touch RECORD icon
on the screen to start
recording. If you want to stop the recording, touch the
SHUTTER key or the STOP icon
on the screen to
stop recording.
·
To change to take photos touch
CAMERA MODE icon
on the screen.
·
If you want to use the preview video
with effect touch the MAGIC icon
and then you can press from left or from right arrow
icons or swipe the screen to go through different video
effects.
·
If you want to see videos please touch the PLAYBACK
icon
.
·
If you want to see the deleted videos or photos you
can touch the TRASH icon
.
3. The Voice Recorder
If you want to RECORDER your voice, please touch the
RECORD icon
and will start to record your voice.
You can touch the STOP icon
to stop the recording.
If you want to see the previous voices recorded you can
touch the screen and swipe.
4. Talking Hippo
Click on Hippo
’
s head (upper part), it shows a happy look
and movement.
Click on Hippo
’
s head (lower part), it shows an angry
look and movement.
Click on Hippo
’
s tummy, it shows a sad
look and movement.
Click on Hippo
’
s hands, it claps its hands.
Click on Hippo
’
s feet, it loses its balance.
Hippo will go to sleep when there is no
operation for 50 seconds.
Imitation
Speak to Hippo, it will put its hand beside its ear, this
specific movement indicate to user that Hippo gets what
he or she said. After that, Hippo will distort and repeat
what it heard.
5. The Timer
Set countdown timer.
·
If you want to start the timer please touch the PLAY
icon
.
·
If you want to change the timer style you can touch
the STYLE icon
or swipe the screen from left or from
right to change; also you have 5 different timers for you
to try out.
·
Touch the TIME to enter the timer settings. Swipe up
or down on the minutes and seconds to change the time.
Once set, press HOME button to go back and save.
·
While the timer is running, tap PAUSE icon
on
the screen to pause the countdown, tap it again to
resume. Tap
to stop the countdown and reset the
timer.