9
Getting Started
Thank you for purchasing the Linortek ITrixx-Ultra 300. The Ultra 300 is an IoT controller and run-time meter. The Ultra 300 is
equipped with two meters on the software that you can use to track equipment usage or uptime/downtime or as a counter.
The Ultra 300 is the latest development of Linortek web-enabled I/O controller with MQTT protocol, hardware-based encryption,
supports HTTPS connections, encrypted email servers, CAN interface, increase in RAM and FLASH memories.
The Ultra 300 is equipped with two digital inputs (5-24VDC), two analog inputs (AC), two relay outputs, CAN interface and built-in
web-based software. All of our controllers come complete with all parts and software necessary for installation, operation and
ability to control the devices attached to it. Upon arrival, please inspect the contents of the box to ensure that your kit is complete
and contains all necessary components.
The iTrixx-Ultra 300 will be referred to as SERVER, and the hour meter as METER hereafter. When there are differences or additional
features they will be noted in the text.
For instructional videos, FAQ’s and contact information for our technical support team, please visit:
https://www.linortek.com/technical-support
PRODUCT CHECKLIST
–
Each product kit box contains the following:
____One iTrixx-Ultra 300 SERVER
____One 12VDC Power Supply
____Micro USB to 12V Jack
____One CAT5 Patch Cord
____One DIN Rail Mount Clip
____iTrixx-Ultra 300 Quick Setting Instruction
____One 2.2k OMETER Resistor Kit
The SERVER is designed to be integrated into existing equipment. Installing your SERVER will involve tapping circuits on the
equipment you intend to monitor.
IN NO EVENT WILL LINOR TECHNOLOGY BE LIABLE, WHETHER IN CONTRACT, TORT, OR OTHERWISE, FOR ANY
INCIDENTAL, SPECIAL, INDIRECT, CONSEQUENTIAL OR PUNITIVE DAMAGES, INCLUDING, BUT NOT LIMITED TO,
DAMAGES FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, OR LOST PROFITS,
SAVINGS, OR REVENUES TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.
FURTHER NOTICE FOR LIMITATION OF USE
Unless specifically stated, this product is NOT designed to switch line voltage devices. This limitation includes all of Linortek
products. To control device that operate at line voltages the user MUST install and intermediary device such as a relay.
When wiring a line voltage device using intermediary device, you MUST either be a qualified electrician or use the services of a
qualified electrician. Additionally, local codes must be followed including, but not limited to, wire gauge size and suitable housing.
Linortek cannot assume any responsibility for harm to the user or third parties for improperly using our Fargo product. This liability
remains with the user. Linortek cannot assume any responsibility for damage to the device for improperly using our SERVER product.