LinMot 0150-5590, Руководство по установке

Страница: 18 / 29

Installation Guide Servo Drives ENG
Page 18 / 29 C1250-MI NTI AG / LinMot
12 Physical Dimension
C1250-MI Series single axis drive C1250-MI-XC-0S C1250-MI-XC-1S
Width mm (in) 25.3 (1.0)
Height mm (in) 176 (6.93)
Height with fixings mm (in) 216 (8.50)
Depth mm (in) 106 (4.2)
Weight g (lb) 700 (1.54)
Mounting Screws
Mounting Distance
mm (in) 2 x M5
198 (7.80)
Case, Degree of Protection IP 20
Storage Temperature °C - 25…40
Transport Temperature °C - 25…70
Operating Temperature °C 0…40 at rated data (40...50 with power derating *)
Relative humidity < 95% (non-condensing)
Pollution IEC/EN 60664-1 Pollution degree 2
Shock resistance (16ms) -1S option 3.5g
Vibration resistance (10-200Hz) -1S option 1g
Max. Case Temperature °C 70
Max. Power Dissipation W 30
Mounting place In the control cabinet
Mounting position Vertical
Distance between Drives mm (in) Without Power Derating *:
20 (0.8) horizontal / 50 (2) vertical
With Power Derating *:
5 (0.2) horizontal / 20 (0.8) vertical
* The derating is depending on the situation in the cabinet. The temperature of the drive should be checked under full load (the temperature should
be stable, which may take an hour or more). This allows to verify that enough margin is there if the cabinet goes to the maximum allowable
temperature of 40° C. For example, if the drive temperature reaches 45° C and the cabinet temperature is 30° C, this would result in a drive
temperature of about 55° C at a cabinet temperature of 40° C. The warning level of the drive is configured by default to 75° C and the error level to
80° C. In this example, everything is fine. If the drive temperature is long time above the warning level, this might result in a reduced lifetime of the
drive.