Model No.
Model No.
QUICK INSTALLATION
BUSINESS SERIES
Wireless-N
Package Contents
• User Guide and QuickVPN Client
Software on CD-ROM
• Network Cable
• Power Adapter
• Stands
• Registration Card
1
NOTE:
Before setting up the
Router, make sure your PCs are
configured to obtain an IP (or
TCP/IP) address automatically
from the Router.
A
Before you begin, make sure
that you have the setup
information for your specific
type of Internet connection.
The installation technician
from your ISP should have left
this information with you after
installing your broadband
connection. If not, you can call
your ISP to request the
settings.
B
Make sure that all of your
network’s hardware is
powered off, including the
Router, PCs, and cable or DSL
modem.
C
Connect one end of an
Ethernet network cable to one
of the LAN ports (labeled 1-4)
on the back of the Router, and
the other end to an Ethernet
port on a PC.
D
Repeat step C to connect
more PCs, a switch, or other
network devices to the Router.
E
Connect a different Ethernet
network cable from your
cable or DSL modem to the
Internet port on the Router’s
back panel.
F
Power on the cable or DSL
modem.
G
Connect the power adapter to
the Router’s Power port, and
then plug the other end into
an electrical outlet.
H
The Power and Internet LEDs
on the front panel will light up
green as soon as the power
adapter is connected
properly.
I
Power on the PCs.
J
The Router’s hardware
installation is now complete.
Connect the Router
Model No. WRVS4400N
Gigabit Security
Router with VPN
C
E
G
Wireless
NOTE:
For details on placement
options such as using the
stands or wall-mounting,
please refer to the User Guide
on the CD-ROM.
These instructions will show you
how to configure the Router. You
only need to configure the Router
once using any computer you have
set up.
A
Open your web browser. Enter
http://192.168.1.1
in its
Address field. Press the
Enter
key.
B
A password request screen
will appear. Enter the default
user name and password,
admin
, in lowercase letters in
the User Name and Password
fields. (For added security, you
should later set a new
password, using the
Administration tab’s
Management screen of the
web-based utility). Click the
OK
button.
C
The web-based utility will
appear with the Setup tab and
IP Versions selected. Click on
the
WAN
option under the
Setup tab.
D
If requested by your ISP
(usually cable ISPs), complete
the Host Name and Domain
Name fields, and the MTU and
MTU Size fields. Otherwise,
leave the defaults.
2
Configure the Router
A
C
B
