Linksys E3000, Руководство пользователя

Страница: 34 / 80

31
High Performance Wireless-N Router
Linksys E3000
Chapter 3: Advanced Configuration
Create or Edit an FTP Folder
Use this screen to add an FTP folder .
FTP Folder Screen
Display Name Create a name for the folder . Enter a
display name that will appear in the Access table of the
FTP Server screen .
Partition
The name of the partition is displayed .
Location
The location of the folder is displayed .
New Folder
Type in a new folder name if you want to
create a new subfolder in the current location . Then click
Create
.
Share entire Partition
Select this option if you want to
share the entire partition with your FTP clients . If your disk
doesn’t have multiple partitions, selecting this option will
share the entire disk . If you do not want to share the entire
partition, then select the folder you do want to share .
Current Folder
The current folder is displayed .
Folder The available folders are listed by Folder name .
Enter into Folder To display subfolders, click this button .
Select Select a folder .
Return to Upper Folder To return to the previous folder,
click this button .
Access
Specify which user groups have read-and-write or read-
only access to the folder . (To create user groups, refer to
Create or Edit a Group Account
,
page 32
.)
Available Groups
To allow a group access to the folder,
select it, and then click the
>>
button .
Groups with Access
To block a group from accessing the
folder, select it, and then click the
<<
button .
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes . Click Close to exit the
screen .
On the
FTP Server screen, click
Save Settings
to apply your
changes, or click
Cancel Changes
to clear your changes .
Storage > Administration
The Administration screen allows you to manage the user
groups and individual users who can access the shared
folders .
Storage > Administration
Information
Server Name The default server name of the Router is
Ciscoxxxxx . XXXXX represents the last 5 digits of your
serial number . This can be found on the bottom of the
router .
NOTE:
If you used the setup software for
installation, then the name of your wireless
network (up to 15 characters) is the server
name of the Router .
Workgroup Name Enter the workgroup name for the
Router; it should match the workgroup name of the
computers on your local network . The Router’s default is
workgroup .
Server LAN IP Address
The local IP address of the
Router’s media and FTP server is displayed .
Server Internet IP Address
The Internet IP address of
the Router’s FTP server is displayed .