Q uick Insta llation G uide
Applicable m odels: LKV-D M 02SK /LKV-D M 04 SK
LKV-DM02SK/LKV-DM04SK
2/4-port Dual Monitor KVM Switch
Quick Installation Guide
Thank you for purchasing the
LKV-DM02SK/LKV-DM04SK
Dual Monitor KVM Switch
! With our highly reliable and
quality product, user can enjoy countless benefits from using
it.
For a quick start on installation and operation, please follow
the instructions below.
The
correct setup sequence
is … …
(1) Connect at least one com pu ter and the shared keybo ard,
dual m onitors/flat panel displays and m ouse to the
KV M Sw itch first
.
(2) Power up your connected com puters
…
Since the KVM Switch receives power from the com puter’s PS/2
interface, it is powered up when you connect the KVM cables to a PC.
Out-of-the-box Installation
LK V -D M 02S K
LK V -D M 04S K
Introduction
The
LKV-DM02SK/LKV-DM04SK Dual Monitor KVM Switch
is a 2/4-port PS/2 KVM Switch that provides dual video
interfaces for your Dual Monitors. It enables user to access,
control, boot and reboot multiple Dual Monitor-enabled
computers using only one keyboard, mouse and dual
monitors. It is designed specifically for sharing dual monitors
between multiple dual- monitor PCs.
Since
Dual Monitor-enabled computers
are gaining more and
more popularity in the finance/banking as well as engineering
and graphics sectors, the Dual Monitor KVM Switch can be
your best solution for the management of two
Dual Monitor-
enabled
PCs.
The Dual Monitor KVM Switch is robust and durable in metal
enclosure, suitable for use in environments pervasive with
electromagnetic interference and wherever a sturdy protective
metal case is needed.
Before you install
The
default
setting
of
the
LKV-DM02SK/LKV-DM04SK
Dual Monitor KVM Switch
is appropriate for most systems.
In fact, you do not need to configure the KVM Switch
before installation.
It’s
a
Plug-and-Play
device:
First,
connect the keyboard, monitors and mouse to the KVM
switch and then connect your computers to the KVM Switch,
and finally boot them up in correct sequence and you can
start to operate immediately!
Take the Dual Monitor KVM Switch out of the box and
begin installation….
Before connecting any cable to your KV M Switch, please m ake
sure all of your com puters and their peripherals have been pow ered
off. O therwise, the Switch system m ight not be set up properly.
Step 1.
Make sure all the computers that are to be connected
to the Dual Monitor KVM Switch and their peripherals
are in powered-off state.
If not, power them off
before you proceed with the following steps.
Step 2.
Connect the shared keyboard, dual monitors/Flat
Panel Displays and mouse to the console connectors
on the rear of your KVM switch.
Step 3.
Connect each of your computers to a PC port on the
rear of the switch. You can use individual standard
keyboard, mouse and video cables or you can use
the KVM Combo Cable for connection. Depending on
the cable you use, the maximum cable distance is
limited to 5 ~ 7 meters (15.5 ~23 feet).
Note that since the KVM Switch is pow ered through the PS/2
interface, it is powered on im m ediately when connected to the PS/2
keyboard/m ouse port of your PC (nonetheless even the PC being in
powered off state).
Step 4
. (
Now your KVM Switch should have been powered-
up….
) Power up the connected computers. After your
computers are powered up the keyboard and mouse
will be recognized and now you can begin operating
the KVM switch.
DO NO T TRY
to perform any channel switching before the
Operating system on your PC has com pletely booted. O therwise, the
interface will not be properly initialized.
DO NO T TRY
to connect the KV M Switch to the com puters
while the com p uters are still in powered-on states. Otherwise, the
com puter will have difficulty recognizing your shared keyboard and
m ouse.
Easy Operation
There are two methods to select a specific computer: using
the
front-panel push button or
a
hotkey sequence.
Front-panel buttons
The front-panel button lets you have direct control over KVM
switch operation and channel switching. Simply press the
button to rotate through to a specific channel.
See
Quick Reference
Sheet
Keyboard hotkeys
A keyboard hotkey sequence consists of at least three specific
keystrokes:
See
Quick Reference Sheet
H otkey seq uence = S crL k + ScrL k + C o m m a n d k ey(s)
The two consecutive ScrLk keystrokes should be pressed within
2 seconds. Otherwise, the hotkey sequence will not be validated.
For detailed Hotkey sequences and their corresponding functional
com m ands, please refer to the Quick reference sheet.
Rev. 1.1
Copyright© All rights reserved. Feb 2004
All manuals and user guides at all-guides.com
all-guides.com
