KVM Switching Client Software for Windows
User-definable Hotkeys
Independent/Simultaneous Audio&PC Switching
Autoscan Delay Time Programmable
Quick Installation Guide
Applicable Models: LKU-S02SK / LKU-S02ASK / LKU-S04ASK
LKU-S02SK / LKU-S02ASK / LKU-S04ASK
2/4-port Slim Palmtop USB KVM Switch
w/
optional
Audio&Mic
Quick Installation Guide
Thank you for purchasing the LKU-S02SK / LKU-S02ASK /
LKU-S04ASK Slim Palmtop USB KVM Switch w/ Audio & Mic.
With our highly reliable and quality product, user can enjoy
countless benefits from using it.
LKU-S02SK
LKU-S02ASK (w/ Audio&Mic)
LKU-S04ASK (w/ Audio&Mic)
Introduction
The LKU-S02SK / LKU-S02ASK / LKU-S04ASK is a 2/4-port Slim
Palmtop USB KVM Switch with
optional
audio and microphone
switching function. It allows you to access, control, boot and
reboot multiple USB-enabled computers. The independent
audio/mic switching function allows an uninterrupted audio
experience on a same connected computer even when you
switch to another computer.
For PCs running Windows systems, it provides an innovative and
easy-to-use
KVM Switcher Software
-- a small windows client
application to facilitate your KVM switching operations such as
PC
selection
and
hotkeys
sequence
programming,
autoscanning, autoscan delay time programming, independent /
simultaneous audio & PC Switching, etc.
Out-of-the-box Installation
Take the Companion Diskette/CDROM and the KVM Switch
out of the box and follow the steps below for installation….
(Skip to step 2 for non-windows based systems.)
Step 1.
Insert the companion CD-ROM into your CD-ROM
drive, and the installer program,
USBKVMIn.exe
, will
be run (or you can find it with the Explorer and double-
click its software icon to start installation). Complete
the software installation on each of the computers to
be connected to the KVM Switch.
After the installation is completed, you will see a KVM
Switcher icon on the system tray of your window
desktop. Just right click to evoke the operation menu
and double-click to evoke configuration box. For
operation details of the KVM Switcher software,
please refer to the
Operation Quick Reference.
: No live connection detected
: Current active PC channel is on port 1
: Current active PC channel is on port 2
The KVM Switcher Software supports only the Windows
Operating System on PC platforms. You can also use the
keyboard hotkey sequence -
ScrLk + ScrLK
- to switch PC. This
hotkey sequence is not available on Mac OS and Linux,
however push button is available for all OS platforms.
Step 2.
Connect the shared USB keyboard, mouse, monitor,
speaker/headphone and microphone each to its port
on your KVM Switch.
Step 3
. Connect each KVM PC port to a computer, using the
slim KVM combo cable and the audio/mic cable. After
you have connected the KVM and computers properly,
now you can operate the KVM Switch immediately.
Some older computers with USB interface might need to
manually enable the USB option in the BIOS settings before
you can use any USB devices. If your USB interface does not
work, please check the USB option status in the BIOS.
If you use Windows 95/98/SE and has not yet installed a USB
mouse on your computer, there might be an error message
telling you that mouse is not detected and prompting you to
decide whether to ignore the same message in the future, and
yet you found there is no mouse movement to disable this
message….So it is suggested that you should installed your USB
mouse on your computer first, before connecting it to this KVM
Switch.
LKU-S04ASK Configuration Diagram
Easy Operation
There are three methods to control your KVM Switch for PC
switching: using the face-panel push button, the keyboard
hotkey sequence, and the Windows software application.
Face-panel button
The face-panel button allows you a direct control over PC port
switching. Simply press the button to switch PC port. By default,
PC port switching and Audio/Mic port switching are unbound
(either will be switched independently).
Keyboard hotkey
A keyboard hotkey sequence consists of at least two specific
keystrokes:
Universal hotkey sequence = ScrLK + ScrLk
Usage: Hit ScrLK key twice within 2 seconds
Hotkey Combination = Ctrl+ Alt + [Command key]
Usage: Hold down CTRL and ALT keys and then hit command key
Note: The command key is user-definable in the Windows software
application only. See Command Key section for details.
Rev. 1.6 Copyright© All rights reserved. Dec 2005
