iPonic 624® Manual PN 995-1124-00
9| Page
The iPonic 624 controller has eight 115 VAC electrical outlets. The default setting
is four outputs for each of two rooms. With the program you can modify the
number of outputs for each room, or even have all eight outputs in one room.
Connecting to the Internet
The iPonic 624 controller comes with a preinstalled
Communication Module
,
which can be used to access the Internet via a standard CAT 5 cable linked to your
router.
Note
: The Ethernet port for the Internet is inside the iPonic 624 controller. Before
proceeding, make sure the Ethernet cable is functioning properly.
To connect your iPonic 624 controller to the Internet:
-
Power down the controller
-
Open up the hinged door
-
Route cable through opening at the base
