www.LinkTechs.net
www.LinkTechs.net
PowerLink AT2 Manual v1.2
314.735.0270
647.725.7011
636.660.1534
[email protected]
[email protected]
[email protected]
314.735.0270
647.725.7011
636.660.1534
[email protected]
[email protected]
[email protected]
8839 Oermann Road
Dittmer, MO 63023
Link Technologies, Inc.
www.linktechs.net
www.towercoverage.com
PowerLink AT2 Manual
Hardware Overview
•
Power Button on Top
•
48v and 24v buttons on front of unit
•
LCD screen to tell you current status
•
Light on top
•
Power Over Ethernet LAN Port
•
USB-C Charging system 2A
•
USB Power Out
•
Optional 5 GHz Access Point
Quick Start
•
Power-On Powerlink AT2 Device
•
Press the voltage you need to power your CPE
•
Use a short CAT5 cable to go between the LAN port on the PowerLink AT2 and the CPE.
•
•
IP address should come from CPE (if you are configured for DHCP on your wireless device), or you will
need to statically configure it.
•
Connect to your CPE using web/winbox or installation application.
Normally there is no need to login to the PowerLink, unless you wish to do some kind of special configuration,
things like change VLANs, SSIDs, security etc. Most of the time the unit will be completely pass-though, and
transparent bridging. Most manufacture applications prefer this.
