11
LED strip manual | liniLED® Top Photon 1200
Work in an ESD protected environment. Make use of an anti-static
strap.
Turn off the power. Make sure the wires are not under electric
current.
0.5 mm
2
8 mm
Solder the wires to the PCB. We advise to use a cable with an area not
higher then 0.5 mm2.
Top view |
Only cut the LED strip extrusion on the dotted line of
the extrusion to prevent damaging the PCB. Carefully cut away this
part of the extrusion.
Side view |
Do
not
cut the PCB!
The end result after cutting the LED strip extrusion should look
similar to the image above.
Solder
5
3
2
4
6
1
