Lingenfelter NCC-001, Инструкция по установке и эксплуатации

Страница: 101 / 171

Setup Menu 100
value in the valid ranges shown above.
7.6 Analog1 Setup Menu
The Analog Clutch Options and settings are available in the Analog1 Setup Menu. The current input options for
Analog1 are OFF or Clutch Position Sensor input.
Analog1 Clutch Option
The Analog Clutch Option allows the NCC-001 to read the clutch position sensor on vehicles with a 0-5 volt output
clutch position sensor. The clutch, therefore, becomes an activation enabler. Many newer vehicles use a clutch
sensor as opposed to the traditional clutch switch. This feature accepts rising or falling input types.
Access from the Controller:
From the Main screen , press the “SETUP” button. Press the “DOWN” arrow button repeatedly until the Analog1
Setup Menu selection is highlighted and then press the “ENTER” button. Once in the Analog1 Setup menu, press
the "ENTER" button to select the Analog Clutch option. Press the “YES” or “NO” button to change the current
selection. If the “NO” button is pressed no change will be made.
Access from the Computer Program:
From the Status screen , press the "SETUP" button. The "Analog Clutch Input" option is found in the "Analog1
Config" dialog box under the "Analog1" Tab. Click "Analog Clutch Input" to enable the Analog Clutch Input feature
or "OFF" to disable the feature.
Analog1 Clutch Activation Percentage
This setting allows the user to define at what clutch percentage the clutch arming occurs.