4.4 Retrieval Function
Retrieval function allow you to find a specific data from a vast array of data.
Also, it is able to count the number of matched data with specific conditions.
Retrieval Condition
Touch“ Retrieval” in the bottom of
screen which displays the measured
data
Touch [ Find factor ] and select the
conditions
Trigger
*1
Retrieve matched data with trigger factor.
Error
Various error.
CAN data
*2*3
Retrieve specific CAN/CAN FD frame
CAN remote
*2
Retrieve specific CAN remote frame.
LIN data
*2 *3
Retrieve specific LIN frame.
Time stamp
*2
Retrieve data of specified time.
Ext IN
*2
Retrieve status of specific external input.
*1: Cannot retrieve data when “ Timer/Counter ” is the trigger factor.
*2:
It is able to use“ don’ t care” (X).
*3: It is able to use bit mask (W0, W1, W2).
*4: Cannot retrieve the elapsed time stamp.
Touch [ ▲ ] or [ ▼
] to start the retrieval and matched data is displayed on
the top of screen.
Touch “Count” on the right side
of screen to count the number of
matched data.
-23-
