LineEye LE-650H2, Инструкция по установке и эксплуатации

Страница: 37 / 44

35
12. OP-SB84 data conversion
The software of LE-650H2 can read the log file(file extension: DT) measured by OP-SB84,
(the USB expansion board of LE-8200(A)), to display the data and save it as the log file of LE-
650H2 (file extension: usr).
*If the data file contains both USB data and VBus measurement data, the file cannot be opened by LE-650H2 software.
＜
Operation
＞
1.Open the log file(.DT)
Drag and Drop the log file(file extension: DT) to the main window of LE-650H2.
Or click [File]-> [Open...].
2.Display the data
Data is displayed on the window when opening the file.
Unique display on OP-SB84
OP-SB84 display After loading the data to the log LE-650H2
「
RESET
」
*No record during the reset period * Displays without record of the reset period.
「
VBUS OFF
」
「
Session end
」
「
Session valid
」
「
VBUS ON
」
No record of the time of packet's end. Records the time of packet's end. * Dummy value
Trigger No(0-7) Display as Trigger No(1-8)
A flag for matched trigger condition is displayed
for each packet.
A flag for matched trigger condition is displayed for
each transaction. *If multipul flags are appeared, the
lowest number is displayed.
Trigger log of external input is displayed in
chronological order.
If there is a trigger log of external input in the
transaction, it is displayed after the transaction.
「
--Overrun--
」
If incomplete packet information is recorded, fot
exsample at the time of overruning data,incomplete
data is displayed or not displayed anything.
If some of the data in the file is corrupt, it will not display.
3.Save the data
Click [File]-> [Save As...] to save the data as the log file (file extension: usr).