LineEye LE-590TX, Руководство пользователя

Страница: 17 / 27

-15-
Chapter 4 Basic Usage
4-1. Connection with PC
Connect the analyzer with PC using the attached Mini-USB cable.
■ Usage of USB branch cable
When the analyzer does not work stably, the bus power may be unstable. Use the attached USB branch cable
to power the analyzer stably.
＜ How to ＞
1 : Connect the 2 male-sides of the cable with the USB ports of Host PC.
2 :
Connect the female-side of the cable with the USB port of the analyzer.
4-2. Network Monitor (TAP Mode)
Run the attached software “LE590-TAP”. When the alert for user account control appears accept it.
Following massage will be appeared. (Appear only once when opening the software)
Click “Re-install Driver” (WinPcap 4.1.3) and set
necessary settings.
Capture packets of target line using the LE590-TAP (TAP mode).