LineEye LE-2500XR, Инструкция по эксплуатации

Страница: 12 / 140

-10-
Key operation
There is a keyboard to input data and operate commands.
Tap Tap the screen once to select the setting etc.
Double tap Tap the screen twice to select and execute the setting.
Swipe Touch and slide the finger to scroll data.
Drag Touch and hold the finger then move it till the target place to select data.
ڦ
Keys
Operations Function
[ ]
Turn ON/OFF the power.
Press it longer to turn off the power.
[RUN] Start monitoring, measuring or testing operation.
[STOP] Stop monitoring, measuring or testing operation.
[MENU] Return to the top menu.
[ESC]
Return to the previous display
Return to the measured data from setting display.
Stop renewing data display while measuring.
[ ▲ ] , [ ▼ ]
Scroll one data line.
Move the cursor on the condition setting.
[
▲
] , [
▲
]
Scroll one character of data.
Change the setting on the condition setting.
[ENTER] Apply selected settings.
[0]~[F]
Enter numerical values.
Select the data send table number.
[TOP/DEL]
Jump to the top of data.
Delete the entry indicated by the cursor.
[END/X]
Jump to the end of the screen.
Enter the data of “Don't Care”.
[SHIFT] Press to use the expanded alternate function of each key.
[SHIFT]+[ESC] Save the screen image to the storage device.
[SHIFT]+[RUN] Brighter the LCD back light.
[SHIFT]+[STOP] Darker the LCD back light.
[ENTER]+[DEL]+[ ] Initialize settings. Clear all.
[SHIFT]+[STOP]+[ ] Start the firmware loader.
* [X]+[Y] indicates the operation of pressing [X] and [Y] together at the same time.
Shortcut keys are available from [MENU] and [0]
~
[F].
10.3 Shortcut Keys
ڦ
Touch panel
Following operation is available