Z10e Electrostatic Ampli2ier User Guide
WARNING:
For safety, the cover of this ampli3ier should be secured at all times. DC
voltages as high as 450V and peak AC voltages as high as 800V are present inside. The
service information contained in this manual is intended only for trained service
personnel.
The Linear Tube Audio Z10e Electrostatic Ampli9ier is a full size and function,
high
quality, Class AB integrated
headphone and speaker ampli9ier
utilizing ZOTL (Zero-
hysteresis Output Transformer-Less) technology. The amplifier can output to standard
580V bias electrostatic headphones, regular headphones, and speakers.
There are 3
inputs (2 single ended RCAs and 1 XLR Balanced), a remote control and front panel
controls, and a front panel dimmable LED display.
Front Panel Controls:
The Z10e utilizes front panel switch controls and a remote
control. The menu functions can be accessed from the front panel switches or by
using the remote control. The power on-off and input selection can only be
performed by using the front panel switches.
Power button:
The ampli9ier is 9irst powered on by the Power switch on the rear of
the unit. Turning the rear power switch activates the power supply but not the
ampli9ier circuitry. The user then activates the front panel Power switch to power
on the ampli9ier. There is a 30 second warm up time for the tubes and the front
panel display will display a message “warming up”, which upon completion, displays
the current volume setting.
Volume Control:
The volume can be turned up or down by turning the ampli9ier’s
volume knob clockwise or counter-clockwise or pressing the up or down button on
the remote. There is a clicking sound when the volume is changing that comes from
