6
a ) Remove camera cover by squeezing the back and front of
the cover as indicated by the “PRESS” indicators at the same
time and lifting it up and away from the lens.
b ) Insert the included video test cable into the RCA jack and
connect to test monitor to set up camera. (see page 8)
c ) Adjust camera viewing angle and secure into place by
tightening thumb screw using a flat head screwdriver. Make lens
and OSD adjustments as required.
a ) Re-attach the camera cover, using the locking nut as a guide,
until it snaps into place.
b ) Use the Hex key to tighten the tamper screws to create a
proper weatherproof seal.
Содержание LSE.CD700VAR
Страница 7: ...7 5 CAMERA ADJUSTMENT...