GENERAL NOTES
1. ALWAYS PROTECT THE WORKSURFACE DURING INSTALLATION.
2. ALWAYS LEVEL UNIT(S) AT FINAL LOCATION.
3. TWO PERSON ASSEMBLY REQUIRED
D1013-0002-00
PAGE 1
INSTRUCTIONS FOR ASSEMBLY OF
DATA PATH 36 (3DR) AND 60 (5DR)
LINEA CONFERENCE TABLE
HBF
HARDWARE
1 TABLE NEEDS TO BE ASSEMBLED AND UPRIGHT
2 PLACE ASSEMBLED DATA PATH IN THE CUTOUT FROM
BELOW TABLETOP. SECURE WITH SCREWS.
- A TABLE WITH ONLY ONE DATA PATH IS SHOWN
COULD BE A COMBINATION OF DATA PATHES.
-THE TOP EDGE SHOULD BE FLUSH OR JUST
BELOW TABLETOP SURFACE.
19917-4774-36 SCR #4X3/4L FH PH
A
DATA PATH ASSEMBLY (3DR) OR (5DR)
B
-SECURE WITH #4X3/4L WOOD SCREW THROUGH
ALL HOLES ON THE INTERIOR OF THE FRAME.
