LBOG-100VAC Series PoE++ Optical Backhaul Demarcation Devices
INSTALLATION MANUAL
Page 1 of 6
PRODUCT OVERVIEW
Lindsay’s LBOG-100VAC series of devices are outdoor-rated fiber PoE++ products designed for backhaul and networking applications. The single and dual output
devices deliver 55 VDC power to remote IP devices with the security of 6 kV surge protection and support 10/100/1000 Mbps data speed. The LBOG-100VAC series
support IEEE 802.3af/at/bt applications. The effective distance is 100 meters over Cat5e/Cat6e cables. The IP66 housing does not need to be opened and provides a
quick, seamless installation.
APPLICATION DIAGRAMS
LBOG-100VAC-95W-1P & LBOG-100VAC-120W-2P
LBOG-100VAC-95W-1P
LBOG-100VAC-120W-2P
WIRE CONNECTION
The power cable diameter is 4-8.2 mm. See photos under the text instructions below.
1.
The AC input port is a screw terminal connector. Near the AC input port there is an indicator showing the pin definition. The 3 pins are labelled: Ground, N
(neutral), and L (line).
2.
Add the cable gland to the cable but do not tighten. Strip 1.0" (2.5 cm) of the cable jacket and 0.4" (1 cm) of each wire jacket.
3.
Insert wires into the correct pin ports and use a straight/slotted screwdriver to fix the wires to each pin.
4.
Slide the cable gland over the AC input port pins and hand tighten to the housing. Hand tighten the cable gland nut to the cable.
5.
Wiring completed.
1
2
3
4
5
