23
EN
INFRARED REMOTE CONTROL
(OPTIONAL)
i
input
volume
LINDEMANN
1. Info button:
shows the device settings on the
display. Press repeatedly to flip through the
settings.
2. Dim button:
adjusts the display brightness.
3. Channel select buttons:
select the desired input.
4. Standby button:
turns the device on and off.
5. Volume buttons:
adjust the volume level.
6. Mute button:
mutes the volume.
7. Play/Pause button:
plays or halts the selected
track.
8. Skip buttons:
skip to the previous/next track.
The remote control is rechargeable. For this pur-
pose connect the remote with a common Micro-USB
cable (smartphone) to a USB charging adapter. Op-
tionally you can also use the USB port on the back
of the musicbook for charging. The battery level
can be viewed by pressing the Info button on the
musicbook display. During the charge process the
LED on the remote lights up in red. If the built-in
battery cannot be charged any more, the LED will
flash red. The battery must be replaced then.
9. LED:
lights up yellow during signal transmissi-
on, red while charging and flashes red in case
of a defective battery.
10. Micro-USB port
for charging the remote. The
battery level can be viewed by pressing the
Info button on the musicbook display.
1
2
3
4
5
q
6
7
8
9
8
p
