Linde CiTi One 1150, Оригинальное руководство пользователя

Страница: 24 / 70

3
General views
Battery charge level
Battery charge level
Battery charge level (1) is shown on the
display.
The charge status is displayed on the battery
itself by means of a diode (2).
To view it, open the battery hood and check
the colour of the diode by pressing the push-
button (3) continuously for 10 seconds:
Battery charge status
Diode colour
Charge
≥
80% Solid green
80%
≤
Charge
≤
20% Solid yellow
Charge
≤
20%
Solid red
.
Battery status

Connect the battery

Start the application and use the battery
until the indicator light flashes red
Depending on the application, the following
indicator lights may be displayed:
White
Discharge or Park: Battery discharged
No voltage on the operating connector.
Yellow
Regeneration charge: The application feeds
a current back to the battery (descending or
decelerating).
Flashing red in quick succession
Fault: Fault noted during use
The battery cannot be used
The battery may switch to energy-saving
mode following a long period of inactivity.
To reactivate the battery:
• Press the push button to find out the battery
charge status
• OR charge the battery
• OR connect the battery to the application
and start the application.
20 1130 801 15 02 EN – 11/2012