Lincoln 2002 Blackwood, Руководство пользователя

Страница: 85 / 240

•
on the owner’s wallet card in the glove compartment
•
taped to the computer module
•
or at your dealer.
When pressing the controls on the keyless entry keypad, press the
middle of the controls to ensure a good activation.
Anti-scan feature
The anti-scan feature prevents
repeated attempts at arriving at a
valid key code.
The keyless entry pad is disabled for 1 minute after 7 unsuccessful
attempts at entering a valid key code. The keypad will flash during this 1
minute mode. However, the 7/8 and 9/0 controls will still lock the vehicle.
Anti-scan will be turned off after:
•
one minute of keypad inactivity.
•
the remote entry transmitter UNLOCK button is pressed.
•
the ignition is turned to the ON position.
PROGRAMMING YOUR OWN PERSONAL ENTRY CODE
To program your own code:
1. Enter factory set code (keypad will illuminate when pressed).
2. Press 1/2 control within five
seconds of step 1.
3. Enter your personal 5 digit code.
Enter each digit within five seconds
of previous one.
Do not set a code that includes five
of the same number or presents
them in sequential order. Thieves
can easily figure out these types of codes.
Your personal code does not replace the permanent code that the
dealership gave you. You can use either code to unlock your vehicle. If a
second personal code is entered, the module will erase it in favor of the
new code.
1 2 3 4 5 6 7 8 9 0
1 2 3 4 5 6 7 8 9 0
Controls and features
85