Lincoln Electric Growth Series Скачать руководство пользователя страница 8

Страница: 8 / 94

Torchmate Growth Series

viii

To the newest member of our Torchmate Family:
Thank You! Thank you for putting your faith and trust in Torchmate. When you

purchased your Torchmate CNC Cutting System, you purchased more than just

a machine. You purchased a team. The Torchmate team was built with the goal

in mind of helping you get the most value out of your automation investment.
For some, this Torchmate CNC Cutting System purchase is their first endeavor

into the world of automation. Others may consider themselves seasoned auto-

mation experts. No matter which category you fall into it is important that you

realize that investing in a Torchmate is unlike any other machinery purchase

you have made. We consider your success our success as well as your chal-

lenges our challenges.
The Torchmate product line is designed to be simple, reliable and accurate.

While there is no “Easy” button on your new system, I can promise that you will

get out of it what you put in. Operating any machinery is a skill and does have a

learning curve.
The first and perhaps most important item we want to give you today is the

Torchmate Technical Support Hotline: (866) 571-1066. This number is toll free

for those within the United States. For those outside the United States, use the

following telephone number: (775) 673-2200.
There is a dedicated professional support staff available Monday – Friday from

6 AM to 4 PM (06:00 to 16:00), Pacific Time Zone, to assist you in any way that

they can. We pride ourselves on offering free unlimited telephone support for

your machine and all we expect in return is communication, understanding and

patience. We are here for you as long as you need us.
Please don’t be a stranger. If you have questions or problems, call us. No mat-

ter how trivial your issue may seem it is not trivial if it cuts into your productivi-

ty. Call, Call, Call! We are here for you! Thank you again for putting your trust in

us. We will do our best to not let you down.
Sincerely,
The Torchmate Technical Support Team

Lincoln Electric Cutting Systems

Welcome to Torchmate

Call us for help

Welcome Letter

Содержание Growth Series































































































Результаты поиска

Содержание Growth Series

Отзывы:

Похожие инструкции для Growth Series

Бренды по названию

Популярные бренды

Lincoln Electric Growth Series, Инструкция по сборке

Результаты поиска

Содержание Growth Series

Отзывы:

Похожие инструкции для Growth Series

Бренды по названию

Популярные бренды