Lincoln Electric Growth Series, Инструкция по сборке

Страница: 66 / 94

Torchmate Growth Series
56
Step C7: Install the drain valve and pan
Required parts /
components
Instructions
Illustration
In step seven, you install the drain valve in the water pan, and then set the pan into the table frame. The pan
will be filled with water after the cutting table is added.
Qty Part Description Part #
1 Assembled water table frame From
Step C5
1 Assembled water pan From
Step C6
1 TFP-AR small table 3/4 plumbing
(water release valve)
TMS-459-0010-01
1 PTFE thread-sealant tape
(recommended)
(separate
purchase)
• Wrap PTFE tape around the valve threads and tighten the water release valve into the
water pan.
• Get some help, as the pan is heavy. Carefully lower the pan into the table frame assembled
in Step 5. The pan simply rests in the frame.
• You may connect a hose or other plumbing to the drain valve so that you may dispose of
the table’s water appropriately, as necessary.
Install the drain
valve and lower
the pan into the
frame