Lincoln Electric Growth Series, Инструкция по сборке

Страница: 63 / 94

Assembly Guide
53
Required parts /
components
Instructions
Illustration
Qty Part Description Part #
2 Assembled end panel / leg component From
Step 3
2 GS water table leg–side From
Step 2-wt
2 GS water table side–long TMS-180-0001-07
2 GS water table side–short TMS-180-0001-08
24
Screw, BSCS,
5
⁄
16
"
–
18 X
5
⁄
8
"
TMS-410-0216-10
24
Nut, Nylock, hex,
5
⁄
16
"
–
18, steel,
zinc-plated
TMS-414-0201-16
Step C4: Connect the side legs and side panels
In the fourth step, you will attach the side legs and panels to the corner legs and end panel assemblies. Be-
cause adjustments may be required, you’ll only partly tighten the screws.
• Complete assembly of the legs and sides of the water table frame. Attach the side panels
(short and long) to the side legs and end panel ⁄corner leg components using
5
⁄
16
"–18 X
5
⁄
8
"
button head cap screws, and
5
⁄
16
"–18 hex nuts.
• The panels are slotted for adjustment after the cutting table is attached.
• Do not fully tighten the cap screws.