Lincoln Electric Growth Series, Инструкция по сборке

Страница: 41 / 94

Assembly Guide
31
Step A6: Adjust the second cross-member
With the gantry secured to your Torchmate 2x4 Growth Series CNC Cutting System table, you can now ad-
just the table’s squareness and securely tighten the cross-members. When squared, the gantry will operate
smoothly and accurately.
Qty Part Description Part #
1 Assembled cutting table From Step A5
1 Tape measure (From your toolbox)
Required parts /
components
Instructions
Illustration First, measure
here — outside of
rail to outside of
rail
Second, measure here.
Adjust this end’s rail
spacing to make both
measurements equal
• Measure the distance between the outside edges of the rails at the gantry end.
• Measure the distance between the outside edges of the rails at the other (non-gantry) end.
• Adjust side rails in the cross-members at the other (non-gantry) end to make both
measurements the same.
• Re-check the measurements, and make diagonal (corner to corner) measurements to
ensure the table is square.
• Tighten all T-bolts on both cross-members.