Lincoln Electric Growth Series, Инструкция по сборке, Страница: 36 / 94

Torchmate Growth Series
26
Step A1: Prepare table sides
The sides of your Torchmate 2x4 Growth Series CNC Cutting System are pre-assembled with a drive-screw,
motor, and steel rails. The cross-members are extruded aluminum channels which are held to the sides with
T-nuts. Here you will prepare sides by adding the T-nuts. In the next step you will add the cross-members.
Qty Part Description Part #
1 GS 4' side set, assembled,
(L / R set)
TMS-180-1000-05
12 Screw, BSCS,
5
⁄
16
"–18 X
7
⁄
8
" T-bolt TMS-410-0216-14
12 T-nut,
5
⁄
16
"–18, steel, black plated TMS-414-3101-16
Required parts /
components
Instructions
Illustration
• On each end of each pre-assembled side, insert three
5
⁄
16
"–18 X
5
⁄
8
" button head screws
through the holes from the outside.
• Fasten a
5
⁄
16
"–18 T-nut to each screw.
• Leave the nuts loose on the screws.
• The T-nuts should be positioned so that the flanges (raised portions) face away from the
screws.
• Do not fully tighten the screws.