Page 25
Expressing Your Milk
Expressing breast milk
For assembling pump and accessories,
.
1. Plug cord into outlet.
2. Center the breast cups over the nipples and turn the pump on
by pressing the cycle speed/power knob (1).
3. Once you’ve begun pumping, you can adjust vacuum strength
and cycle speed to your comfort.
See “Controls and Features” on
4. Hold one storage container in the
crook of your arm and the other in your
hand. Now one hand is free to adjust
pump settings, rock the cradle, or
answer the phone.
5. When finished pumping, turn off
pump then remove breast cups from
breast. Carefully set storage
containers into holders (6),
) to prevent
tipping over and milk spilling
into tubing.
Caution!
Turn off pump first before removing breast cups from
breast. Do not tip storage containers or allow them to overfill or milk
will enter tubing and filter. If this happens, remove filter, rinse tubing
with cool water and then warm water. Air dry. The filter must be
replaced if it gets wet or if milk gets inside.
Storing breast milk for term infants at home or away
Your
Joy
breast pumps are equipped with storage containers for
Содержание Joy
Страница 1: ...Owners Manual ...