manualshive.com logo in svg

Limerick Joy, Руководство пользователя

C Luce Joy - продукт, который принесет вам радость и комфорт. Перед началом использования необходимо скачать быстрое руководство на manualshive.com для подробной информации. Загрузите его бесплатно и начните наслаждаться всеми преимуществами этого удивительного устройства.

Поделиться
Скачать
background image

Page 13

Controls and Features

Vacuum strength knob

The 

vacuum strength knob

 controls the suction strength (vacuum) 

for balancing effectiveness and comfort and will also slow down cycle 
speed as vacuum is increased. Rotating the 

vacuum strength knob 

to the right increases the strength and rotating the 

vacuum strength 

knob

 to the left decreases the strength. A vacuum setting of 1 (one) 

applies a low suction strength (vacuum). A vacuum setting of 80 
(eighty) applies a high suction strength (vacuum). Your 

Joy

 breast 

pump always maintains a slight vacuum.

Since each mother/baby couple’s breast-feeding experience is 
different, the adjustment of these knobs will be an individual choice. 
The goal is to adjust the suction rhythm (cycle) to what best mimics 
your baby’s sucking pattern and to adjust the suction strength 
(vacuum) to a comfortable setting. Note that the vacuum setting will 
also affect the suction rhythm (cycle). Increasing the vacuum level 
will decrease the number of cycles per minute (slow cycles).

Adjusting the cycle speed will not change the vacuum level. Cycle 
speed is independent of vacuum strength.

When you begin to use 

Joy

 breast pump, it’s recommended that you 

use a fast suction rhythm (cycle) and low suction strength (vacuum). 
Pump is programmed to start at this setting when first used or if 
pump is left off for more than 5 (five) minutes. This will create a flutter 
like sensation and allow for a comfortable setting so you can get used 
to the pump.

After 1-2 minutes of pumping, increase the suction strength (vacuum) 
by rotating the 

vacuum strength knob

 to the right, to a suction 

strength that feels comfortable to you and similar to your baby’s 
suckle.

Note:

 When vacuum strength is increased, the cycle speed will 

decrease slightly.

Содержание Joy














































Отзывы:

Нет отзывов

Похожие инструкции для Joy

Бренды по названию

Популярные бренды

Загрузить еще бренды