Lilliput 1/C/T, Руководство пользователя

Страница: 16 / 16

monitor status. To delete the deactivated monitor information, please uninstall
„Display link Core software‟ driver. Once the driver is uninstalled, you may
not use USB MONITOR. To use USB MONITOR again please re-install the
driver.
Q: How can I clean the outer case/LCD Panel?
A: Disconnect the USB cable and then clean the USB MONITOR with a soft cloth,
using either a cleaning solution or plain water.
Do not leave any detergent or scratches on the case. Do not let any water enter
the monitor.
Q: I lost USB MONITOR installation disc. Where can I get an additional
installation disc?
A: please contact with dealer
Q: When USB MONITOR connected with PC first, after PC starts, USB
MONITOR is standby and no display?
A: Plug-out and plug in again with the USB cable between PC and USB
MONITOR; or press “POWER” button on USB MONITOR to off, and then
power on.
Q: The monitor‟s sound function disabled.(only model 2)
A: If the monitor is silent, please check whether the computer is mute or not.
Q
：
what should do when can not touch or touch abnormally?
A
：
please check the touch software is installed if can not touch. (Please refer to 7.
Touch Function Instruction 1. Touch software installation. )
Please start calibration setting when touch abnormally. (Please refer to 7.
Touch Function Instruction, touch calibration)