Instruction Manual
Part Description & Dimensions
D/N 2MP HD PTZ DOME IP
CAMERA
For connecting D/N HD IP Camera series to the network, please follow one of the
system architectures:
(1). Use DC12V power adaptor and network switch connected to a network.
System Architectures
(3). Use PoE power injector and the network switch connected to the network.
PoE Switch
PC
LAN
LAN / Internet
PoE Power Injector
PC
LAN
LAN / Internet
AC
Non-PoE Switch
LAN
Installation
Bottom bracket
Upper cover
Transparent cover
Lens
RJ-45 Ethernet connector (supports PoE)
Power jack (DC12V
±10
%)
Alarm In/Out connector
Micro SD card slot
Factory default button
PC
LAN
LAN / Internet
Non-PoE Switch
DC12V Adaptor
(2). Use with PoE of the network switch connected to the network.
1.
Retrieve the camera and remove the bottom bracket from the
upper cover with a hex key (FIG.1).
Use the included screws (M4.0x25) through the holes marked as
“a,” and fix the camera in the desired location (FIG.2 & FIG.3).
: The line group direction in the back.
NOTE
Unit: mm
3.
connector to the RJ-45 connector and the DC-in connector and
Alarm in/out connector, respectively (FIG.4).
Attach the Ethernet and power cables and Alarm in/out jack
Connect the RJ-45 Ethernet cable with a waterproof connector
First, remove the waterproof connector and unscrew the
waterproof nut. Insert the Ethernet cable and connect to the
RJ-45 connector with proper tools (FIG.5). Then, tighten the
waterproof connector and nut before the RJ-45 connector is
connected to the camera (FIG.6).
FIG. 5
FIG
.
6
4. Secure the upper cover to the bottom bracket with a hex key
(FIG.7).
16
57
106
120
2
4
2
1
2
2
2
3
2
8
2
9
2
9
120°
8°
φ
108
Front
FIG
.
3
FIG
.
2
FIG
.
1
+5V
N.O.
COM
Alarm IN
GND
RED
WHT
GRN
ORG
BLK
SIREN
FIG. 4
FIG
.
7
HD IP CAMERA
HD IP CAMERA
HD IP CAMERA
Network Cable
DC Power Input
Alarm In/Out
Connector
66-PZD6422CSE-2
