8 Port Nway PoE
Fast Ethernet Switch
User’s Manual
FCC Warning
This device has been tested and found to
comply with limits for a Class A digital device,
pursuant to Part 15 of FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates
and radiates radio frequency energy and, if
not installed and used in accordance with the
user’s manual, it may cause interference in
which case users will be required to correct
interference at their own expenses.
CE Warning
This is a Class A product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
This switch provides 8 10/100M ports. It was
designed for easy installation and high
performance in an environment where traffic
is on the network and the number of users
increases continuously.
It consists of 8 PSE/PoE ports. That can solve
the limitation of the power outlet location and
offer the system designer a flexible solution to
locate the network device everywhere
.
The compact rigid desktop size was
specifically designed for small to medium
workgroups. It can be installed where space
is limited; moreover, it provides smooth
network migration and easy upgrade to
network capacity.
Package Contents
Before you start to install this switch, please
verify your package that contains the following
items:
One PoE Fast Ethernet Switch
One Power Cord
One User’s Manual
Note: If any of these items is found missing or
damaged, please contact your local supplier
for replacement.
Key Features
8 Port 10/100M Nway (Auto-negotiation)
Switch
8 PSE/PoE function ports
Supporting the power Max. 15.4 W for each
PSE/PoE port
11
” Desktop size with metal case
Can be installed in
a 19
” cabinet by
rack-mount kits
Auto-learn of networking configurations
Auto-detect full/half-duplex modes for any
port
Dedicated full-duplex 200Mbps bandwidth
Store-and-Forward switching methods
IEEE 802.3x flow control for full-duplex and
back-pressure flow control for half-duplex
Non-blocking & Non-head-of-line blocking
full wire speed forwarding
Auto-MDI/MDI-X function for any port
Smart plug & play
Front Panel (LEDs)
LED Indicators of 8 Port PoE 10/100M
Switch
LED
Status
Description
Power
On
Power is on.
Off
Power is off.
LINK/ACT On
Port is for connection.
Off
No connection.
Flashing Data is transmitting or
receiving
PoE
On
Port is linked to Power
Device
Off
No Power Device is
connected
Connections
Switch/Hub to this 8 Port PoE Fast
Ethernet Switch
This switch provides automatic crossover
detection functionality for any port. It is
simple and friendly to up-link to another switch
without crossover cable.
