28 66-UM-4KNVR-CSE-6
Chapter 5-1 General
⚫
Record Mode: Switch on/off scheduled recording.
⚫
Audio: Switch on/off audio recording.
⚫
Post-alarm Record: Enable to record after an event takes place. Set the time (second) for the
NVR to record after the alarm is triggered.
⚫
Weighted Record: If any alarm is triggered when
Weighted Record
is turned on, the recording
frame rate will be adjusted to the pre-determined value (which can be set in
CAMERA SETUP
).
Otherwise, the NVR will record at a lower frame rate (approximately 4
–5 FPS).
Note:
System Recording Mode
must set to
Schedule
and
Recording schedule
set to
Always
.
Chapter 5-2 Schedule
To modify the recording schedule, switch the recording type from
Always
(continuous recording),
Alarm
(record only when an alarm is triggered), or
No Record
(disable recording), and highlight the desired
date and time accordingly. Click
Apply All
to apply your selection of recording type to all dates and time.
Chapter 5-3 Advance
