EM58 • HS58 • HM58 POWERLINK
5.4.13 Logger Monitor
Among the diagnostics tools provided by Automation Studio is the Logger
Monitor.
It is used to record system information, the system messages are automatically
entered in the list in the
SL1 [Logger]
window.
To enter the Logger Monitor window, press
Open
in the menu bar of the main
page and then the
Logger
command.
Figure 30 - Entering the Logger Monitor
The
SL1 [Logger]
window will be displayed.
Figure 31 - Logger entries
In the highlighted logger entry the SDO abort code is shown in the Binary Data
column (6090031h abort code: “Value of parameter written too high”, for the
complete list of the SDO abort codes see on page 102).
MAN EM58_HS58_HM58 PL E 1.1.odt
Quick reference
60 of 108
