EM58 • HS58 • HM58 POWERLINK
3.2.2 EMC59, HSC59, HMC59
•
Mount the encoder on the motor shaft using the reducing sleeve
8
(if
supplied). Avoid forcing the encoder shaft;
•
fasten the fixing plate
4
to the rear of the motor using two M3 x 8 cylindrical
head screws
5
;
•
fix the collar
3
to the encoder shaft (apply some threadlocker to the screw
3
).
A = min. 8 mm, max. 18 mm
MAN EM58_HS58_HM58 PL E 1.1.odt
Mounting instructions
27 of 108
