Lika IF50, Руководство пользователя

Страница: 26 / 40

IF50
11.7 Input settings
Input configuration
It sets the behaviour of the CONTROL input (terminal 10, see section “5 -
Electrical connections” on page 46 and section “5.4 CONTROL input” on page
47):
0
= static operation with “high” level
1
= dynamic operation by rising edge
2
= dynamic operation by falling edge
3
= dynamic operation by rising edge *)
4
= dynamic operation by falling edge **)
5 = static operation with “low” level
*) The same as option 1 except that it needs a double command
**) The same as option 2 except that it needs a double command
Input function
It sets the function of the CONTROL input (terminal 10, see section “5 -
Electrical connections” on page 46 and section “5.4 CONTROL input” on page
47):
0
= no function
1 = it sets the counter A to Set value A
2 = it sets the counter B to Set value B
3
= it sets the counter A to
Set value A
and the counter B to
Set value B
4
= it inhibits the counter A (count disabled)
5
= it inhibits the counter B (count disabled)
6
= it inhibits both counters A and B
7
= it activates a serial data transmission cycle
MAN IF50 I_E 1.0.odt 11 - Parameter settings 66 / 80