Lika IF50, Руководство пользователя

Страница: 24 / 40

IF50
11.6 Serial communication settings
Unit Number
It is necessary to assign a specific address to each unit, since up to 32 units can
be connected to the same bus in a RS-485 network. You can choose any address
number between 11 and 99.
Factory setting =
11
NOTE
The address must not contain any “0“ because such numbers are reserved for
collective addressing.
Serial Baud Rate
Setting Baud
0 (factory default) 9600
1 4800
2 2400
3 1200
4 600
5 19200
6 38400
Serial Format
Setting Data bits Parity Stop bits
0 (factory default) 7 even 1
1 7 even 2
2 7 odd 1
3 7 odd 2
4 7 none 1
5 7 none 2
6 8 even 1
7 8 odd 1
8 8 none 1
9 8 none 2
MAN IF50 I_E 1.0.odt 11 - Parameter settings 64 / 80