Lika CB59, Руководство пользователя, Страница: 6 / 8

CB59 – CB60 - CB61
2 - Identification
Device can be identified through data (ordering
code and serial number) available in the label
applied to its body. Information is listed in the
delivery document. For any information on the
technical characteristics of the product,
refer to
the technical catalogue
.
3 - Mounting instructions
WARNING
: installation and
maintenance operations have to be
carried out by qualified personnel only,
with power supply disconnected and
mechanical parts absolutely in stop. Do not tool the
unit.
3.1 Installing the encoder
For correct installation a M5-threaded bore has to
be provided in the motor shaft (see Figures below).
To install the encoder please follow carefully the
next steps:

unscrew the plastic cap on the rear side of the
encoder;

insert the encoder in the motor shaft and fix it
using the provided M5 screw (reference
1
);

replace and tighten the cap previously removed;
 fasten the encoder to the motor frame through
the fixing plate using M3 screws (reference
2
).
MAN CB59_CB60_CB61 I_E 1.11.odt 6 www.lika.it
www.lika.biz
Figure 1 - CB59
Figure 2 - CB60