8
Specification
1920x1080@60Hz
；
1680x1050@60Hz
；
1440x900@60Hz
；
1360x768@60Hz
；
1280x1024@60Hz
；
1280x960@60Hz
；
1280x720@60Hz
；
1024x768@60Hz
；
800x600@60Hz
VGA OUT
HDMI EXTENDER RX
(
Receiver
)
TV
Audio OUT
VGA IN
HDMI EXTENDER TX
(Sender)
PC
Audio IN
User manual
HDbitT VGA over single network
cable Extender
Discription
Transmit protocol
HDbitT
Support resolution
Transmit distance
Transmit 1080P signal over cat6 up to 120 meters
CAT5
：
80m
、
CAT5E
：
100m
、
CAT6
：
120m
It transmits up to 150meters over higher quality level network cable.
Audio
3.5mm audio jack
Working temperature
0
℃～60℃
Power supply
DC5V/2A *2pcs
Power consumption
TX<7.5W RX<7W
Items
Product dimension
Color
138x90x23.8mm *2pcs
TX
:
215g
RX
:
215g
Black
Product net weight
VGA signal format
RGBHV
VGA resistance
75
Ω
The product name and brand name may be registered trademark of related
manufacturers.TM and ® may be omitted on the user manual. The pictures
on the user manual are just for reference,and there may be some slight
difference with the real products.
We reserve the rights to make changes without further notice to a product
or system described herein to improve reliability, function or design.
Disclaimer
1
.
Make Cat5/6 network cable
Follow the standard of IEEE-568B:
1. white and orange 2. orange 3. white and green
4. blue 5. white and blue 6. green
7. white and brown 8. brown
2
.
Connection
2.1 Transmit 1080P signal over cat6 up to 120 meters and 150
meters over higher quality level cables.
6
Installation procedures
Cat5/6 cable
Q: It displays“waiting for connection” at bottom right corner of screen?
A: Please check if the power supply of TX (sender) and the network cable
are well connected.
Q: It displays“
Please check the TX input signal”at middle of screen?
A: 1) please check if there is an VGA signal input of sender TX.
2) Try to connect the source device directly with display device to see if
there is signal output from source device or change the source device
and VGA cables to retest.
Q: Display not fluent and stable?
A : 1) Make sure network cable length is within the required range.
2) Press“reset” button on the TX/RX panel.
7 RFQ
