Page 66 / 127
Section 7.
LW2 Programmer’s reference
7.2.3. View firmware version of the CPU
Description
: View the CPU firmware revision.
Format
Example
Command {f}
→ {f}
Response (FW:<FW_VER><s>)CrLf
← (FW:1.0.0b4 r972)CrLf
Legend:
<FW_VER> is the firmware version. It is followed by <s> string which may indicate
special versions. <s>=r indicates standard version.
7.2.4. Connection test
Description
: Simple test to see if the connection is established successfully.
Format
Example
Command {PING}
→ {ping}
Response (PONG!)CrLf
← (PONG!)CrLf
7.2.5. View serial number
Description
: The transmitter responds its 8-digit serial number.
Format
Example
Command {s}
→ {s}
Response (SN:<SERIAL_N>)CrLf
← (SN:12345671)CrLf
7.2.6. Compile time
Description
: Returns the date, when the microcontroller firmware was compiled.
Format
Example
Command {CT}
→ {ct}
Response (Complied: <DATE&TIME>)
CrLf
← (Compiled: Sep 11 2014 18:05:41)
CrLf
7.2.7. View installed board(s)
Description:
Shows the hardware name and revision of the installed cards.
Format
Example
Command {is}
→ {is}
Response
(SL#●0●<MB_DESC>)CrLf
(SL●END)CrLf
←
←
(SL# 0 UMX-TPS-TX140 V10_2a)
CrLf
(SL END)CrLf
Explanation:
The device reports its motherboard (slot 0).
7.2.8.
View firmware for all controllers’
Description
: Shows the firmware versions of all installed controllers.
Format
Example
Command {FC}
→ {fc}
Response
(CF●<DESC>)CrLf
(CF●<DESC>)CrLf
…
(CF END)CrLf
←
←
(CF UMX-TPS-TX140 1.0.0b4
r972)CrLf
(CF END) CrLf
Explanation:
The device has one control panel.
