Lightware UMX-HDMI-140, Руководство пользователя

Страница: 78 / 161

6. LW2 Programmer's Reference UMX-HDMI-140 series– User's Manual 78
Applied firmware package: v1.3.0b5 | LDC software: v2.5.6b2
6.6.2. RS-232 Parameters Settings
The parameters of local RS -232 port can be set as follows.
Command and Response
ȩ
{RS232_LOCAL_FORMAT= <BaudRate> ; <DataBit> ; <Parity> ; <StopBit> }
Ȩ
(RS232_LOCAL_FORMAT= <BaudRate> ; <DataBit> ; <Parity> ; <StopBit> )CrLf
Parameters
Parameter Parameter description Value Parameter value
<BaudRate> Baud rate
X No change
4800 4800
7200 7200
9600 9600
14400 14400
19200 19200
38400 38400
57600 57600
115200 115200
<DataBit> Data bit
X No change
8 8
9 9
<Parity> Parity
X No change
N None
E Even
O Odd
<StopBit> Stop Bit
X No change
1 1
1,5 1,5
2 2
Example
ȩ
{rs232_local_format=9600;8;O;X}
Ȩ
(RS232_LOCAL_FORMAT=9600;8;O;X)
Explanation
RS -232 port is set as the following: the baud rate to 9600, data bit to 8, parity to odd, and stop bit is not
changed, remained 1.
INFO: The actual RS-232 parameters can be queried by the {RS232_LOCAL_FORMAT=?} command.
6.6.3. RS-232 Control Protocol Port Setting
The control protocol of local RS -232 port can be set as follows.
Command and Response #protocol
ȩ
{RS232_LOCAL_PROT= <protocol> }
Ȩ
(RS232_LOCAL_PROT= <protocol> )CrLf
Parameters
Parameter Parameter description Value Parameter value
<protocol> RS-232 control protocol
LW2 LW2 control protocol
LW3 LW3 control protocol
Example
ȩ
{rs232_local_prot=lw2}
Ȩ
(RS232_LOCAL_PROT=LW2)
INFO: The actual RS-232 parameters can be queried by the {RS232_LOCAL_PROT=?} command.
  
